ZX Sprinter Assembled Guide_test.pdf

(2601 KB) Pobierz
TM
Mainboard
SP 2000
Assembly Guide
PETERS PLUS
ATTENTION!
Turn off the power to your system and discharge your body`s static
electric charge by touching a grounded surface - e.g., the metal surface of
the power supply - before performing any hardware procedure.
In incident of the incorrect installation of the equipment, the
manufacturer of mainboard does not bear any liability for any direct or
indirect damage of mainboard or any other components of the computer. If
you do not feel comfortable performing the installation, consult a qualified
computer technician.
Damage to mainboard and injury to yourself may result if power is
applied during installation.
1. The technical description.
Introducing.
The mainboard Sp2000 is designed for a model series of computer
Sprinter. The mainboard shiping in the collected kind and useful in a basic
configuration. The mainboard was designed for the installation in a case AT
MiniTower and has standard connectors for set of the keyboard and power
(connectors P8 and P9 of the power supply), connectors male for set FDD,
devices of IDE, mouse, printer, joystick and taperecorder, video, button of reset,
indicators POWER, TURBO, HDD. Two slots ISA-8 do access to cards in them.
Mainboard features.
1. CPU Z84C15 (21MHz/3.5MHz)
2. RAM (72 pin SIMM, 7MHz) 4Mb
3. VideoRAM 256Kb (up to 512Kb)
4. ROM - 256Kb
5. Fast RAM - 64Kb
6. PLD EP1K30QC208-3 by ALTERA
7. FDD controller (Wd1793). Usage of FDD 3.5' on 720Kb/1.44Mb
and 5.25' on 720Kb is possible.
8. IDE interface. Two connectors for set up HDD and CD-ROM.
9. Bipper, AY-3-8910, stereo DAC (16bit).
10. Kempston joystick, tape in/out.
11. Controller MS-Mouse.
12. LPT interface.
13. Two slots ISA-8.
14. Capability real time clock CMOS (DALLAS) install.
15. Connectors for the power supply from AT case. Need +5V, -5V,
+12V, -12V.
POWER
FDD Controller
FDD Connector
Sound
IDE 2
IDE 1
Video
CMOS
SIMM
Joy/ Tape
Printer
Mouse
CPU
Z80
Altera
Video
RAM
BIOS
ISA Slot
ISA Slot
2. Assembly of the computer Sprinter.
The standart configuration of the computer Sprinter.
1.
2.
3.
4.
5.
AT Mini Tower case with power supply.
Mainboard Sp2000
FDD 3.5'.
AT keyboard.
MS-Mouse.
Assembly of the system unit.
1. Scan the mainboard. See figure 1 and find connectors: mouse
(mouse), printer (LPT), joystick/ tape (KMPS), keyboard (KBD), bipper, power
(P8, P9), floppy disk drive (FDD), Power LED, HDD LED, Turbo LED, Reset,
IDE Interface (IDE1, IDE2), sound (SND), video out (video). You must find
pin number “1”. If you have not found any connectors or have failed to
determine the necessary contacts, address to the specialist.
2. Find seven fastening holes.
3. Try on mainboard in case and determine, for what holes it is
possible to put steel props. Usually the steel props are twisted on removable
panel of case. Twist the steel props and insert plastic props into the free holes of
mainboard.
4. Install the mainboard on the removable panel of case. When
mainboard stand in the case, connector of the keyboard should be opposite to a
round hole in a back wall of case. The mainboard shouldn’t touch anywhere
metal of case.
5. Install the removable panel with the mainboard in case.
6. Put on connectors of power supply (P8, P9).
Attention! Power supply has a lot of connectors. For power of
mainboard use P8 and P9 only. Connector P8 use +5V, +12V and -12V.
Connector P9 use +5V and -5V.
7. Put on ribbon cable of the floppy disc drive and hard disc. First pin of
ribbon cable is
red
. Connect this pin and pin of mainboard number “1".
8. Standard package include (figure 2) another five ribbon cabeles.
- 25-pin D-sub male connector with ribbon cable (tape and joystick)
- 9-pin D-sub male with ribbon cable (for mouse)
- 15-pin D-sub female connector with ribbon cable (for video)
- Printer ribbon cable with 25-pin D-sub female connector
- Audio ribbon cable with jack connector.
First pin or ribbon cable is
red
. Connect it and pin of mainboard number “1".

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin