CPU-Z Readme file ------------------ Version 2.13 December 2024 Contact : cpuz@cpuid.com Web page: https://www.cpuid.com/softwares/cpu-z.html Validation page : https://valid.x86.fr/ Hall of Fame : https://valid.x86.fr/records.php CPUID SDK : https://www.cpuid-pro.com/products-services.php Configuration file (cpuz.ini) ------------------------------ The configuration file must be named cpuz.ini and be present at the same directory level as cpuz.exe. It contains the following : [CPU-Z] VERSION=x.x.x.x TextFontName= TextFontSize=14 TextFontColor=000080 LabelFontName= LabelFontSize=14 ACPI=1 PCI=1 MaxPCIBus=256 DMI=1 Sensor=1 SMBus=1 Display=1 UseDisplayAPI=1 BusClock=1 Chipset=1 SPD=1 XOC=0 CheckUpdates=1 - TextFontName : Font used for the information boxes. - TextFontSize : Size of the font used for the information boxes. - TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB - LabelFontName : Font used for the label boxes. - LabelFontSize : Size of the font used for the label boxes. - Sensor : Set to OFF (or 0) disables sensor chip detection and voltages measurement. 1 to enable. - PCI : Set to OFF (or 0) disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. 1 to enable. - MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256. - DMI : Set to OFF (or 0) disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable. - SMBus : Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. 1 to enable. - Display : Set to OFF (or 0) disables the video card information reported in the validator. 1 to enable. - UseDisplayAPI : Set to 1, uses the display driver to read the display adapters information. - BusClock : Set to 1, uses the bus clock as primary clock source. Set to 0 to use an alternate method. - Chipset : set to OFF (or 0) disables the memory controller and southbridge information. 1 to enable. - SPD : set to 0 to disable SPD reading. 1 to enable. - XOC : eXtreme Overclock Mode : runs CPU-Z with as little system load as possible. Your system won't be fully validated before it is manually checked. Requires to restart CPU-Z. - CheckUpdates : set to 0 to disable the new version checker at startup. 1 to enable. Parameters ---------- -txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt) in the same directory as the exe file. -html=filename : Same as "-txt" except it generates the html report. -core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one). -bench : runs CPU-Z without interface, runs the benchmark, and saves the result in a TXT file named like the machine. Keys ---- F5 : save the current tab in a bmp file F6 : save the current tab in the clipboard F7 : save cvf file in the current directory History ------- -------------------------------------------------------------------------------------------------- 2.13 - December 2024 - Intel Arc B580 GPU. - Intel Arrow Lake-U preliminary support. - Improved support of Intel Lunar Lake. - Intel Q870, B860, H810, W880, HM870, WM890, WM880 chipsets. - AMD X870/B840 chipsets. - CAMM2 memory modules type. -------------------------------------------------------------------------------------------------- 2.12 - November 2024 - AMD Ryzen 7 9800X3D (Granite Ridge). - Intel Core Ultra 9 285HX, Ultra 7 275HX/265HX/255HX, Ultra 5 245HX/235HX (Arrow Lake-HX). - Intel Core Ultra 9 285H, Ultra 7 265H/255H, Ultra 5 235H/225H (Arrow Lake-H). - Intel Core 7 160HL, 150HL, 160UL, 150UL, 150U (Raptor Lake). - Intel Core 5 130HL, 120HL, 130UL, 120U (Raptor Lake). - Intel Core 3 100HL, 100UL, 100U (Raptor Lake). - CUDIMM DDR5 memory. -------------------------------------------------------------------------------------------------- 2.11.2 - October 2024 - Fixes ARL memory clock and timings (2.11.2). - Adds microcode revision report in Mainboard tab / BIOS. - Improved support of AMD Strix Point (including GPU). - AMD Granite Ridge/Strix Point memory p-states. - Improved support of Intel Arrow Lake clock multiplier granularity. - Intel Core Ultra 5 235, 225 & 225F (Arrow Lake). - Intel Core i9 14901KE & 14901E, Core i7 14701KE, Core i5 14501E & 14401E/F (Raptor Lake). -------------------------------------------------------------------------------------------------- 2.10 - July 2024 - AMD Ryzen 9 9950X (16C/32T), 9900X (12C/24T), Ryzen 7 9700X (8C/16T) and Ryzen 5 9600X (6C/12T) Granite Ridge (Zen 5). - AMD Ryzen AI 9 HX 375 (4x Zen 5 + 8x Zen 5c), Ryzen AI 9 365 (4x Zen 5 + 6x Zen 5c) Strix Point APUs. - AMD Ryzen 9 8945H, Ryzen 7 8845HS (Hawk Point). - Intel Core Ultra 9 285K & 275, Core Ultra 7 265K & 255, Core Ultra 5 245K & 240 (Arrow Lake). - Intel Core Ultra 9 288V ; Ultra 7 268V, 266V, 258V, 256V ; Ultra 5 236V, 228V, 2266V (Lunar Lake). - AMD Radeon RX 7600 XT (Navi 33 XT). -------------------------------------------------------------------------------------------------- 2.09 - January 2024 - Improved support of Intel Meteor Lake and preliminary support of Arrow Lake. - AMD Hawk Point and Hawk Point 2 (Zen 4/Zen 4c). - NVIDIA RTX 4070 SUPER (AD104-350). - The benchmark can now be ran on a single coreset/cluster. -------------------------------------------------------------------------------------------------- 2.08 - September 2023 - Improved support of Intel Meteor Lake. - Intel Core i5 14400F, 14400T, 14400, 14500 and 14500T. - Intel Core i3 14100F, 14100T and 14100. - Intel 300 and 300T processors (RPL, 2c, 65/35W). - AMD Threadripper PRO 7995WX (STP, 96c), 7985WX (STP, 64c), 7975WX (STP, 32c), 7955WX (STP, 16c) and 7945WX (STP). - Preliminary support for AMD EPYC Bergamo. - Fixed delay generated by version checking. -------------------------------------------------------------------------------------------------- 2.07.1 - September 2023 - Intel Core i9-14900K/KF (24c), Core i7-14700K/KF (20c), Core i5-14600K/KF (14c). - Fix memory information on Intel Core i5 13400F. - Support of Intel Core 3, 5, 7 and Core Ultra 5, 7, 9 new branding. - Preliminary support for Intel Meteor Lake. - AMD Radeon RX 7800 XT and 7700 XT (Navi 32). -------------------------------------------------------------------------------------------------- 2.06.1 - June 2023 - AMD Ryzen Z1 and Z1 Extreme (2.06.1). - AMD Ryzen 9 7940H & HS, Ryzen 7 7840HS (2.06.1). - Fixed AMD EPYC Milan reported as Genoa (2.06.1). - Intel Core i9 13980HX, 13900HX, 13900HK (2.06.1). - Intel Core i7 13700H, 13650HX (2.06.1). - Intel Core i5 13500HX, 13420H (2.06.1). - Intel N97, N95 and N50 (ADL-N, 6W to 15W). - AMD Dragon Range Ryzen 9 7945HX (16c/55-75W), 7845HX (12c/45-75W), Ryzen 7 7745HX (8c/45-75W), 7645HX (6c/45-75W). - Zhaoxin C-1080 IGP (KX-6000G). - Zhaoxin KH-40000 YongFeng (12/16/32c). - NVIDIA RTX 4070 (AD104-250). - NVIDIA RTX 4060 Ti (AD106-350). - AMD Radeon RX 7600 (Navi 33 XL). -------------------------------------------------------------------------------------------------- 2.05.1 - March 2023 - Fix RTX 4090/4080/4070 detection bug (2.05.1). - Fix DMI crash bug (2.05.1). - Intel Xeon Sapphire Rapids platform. - Preliminary support for AMD Storm Peak platform. - Zhaoxin KX-6000G/4 CPU. -------------------------------------------------------------------------------------------------- 2.04 - January 2023 - Intel N100 and N200 (ADL-N). - intel Core i3 N300 and N305 (ADL-N). - Intel Core i5 13450HX, 13500HX, Core i7 13650HX, 13700HX (55W). - Intel Core i9 13900KS. - AMD Ryzen 9 7950X3D, 7900X3D, Ryzen 7 7800X3D. - AMD Ryzen 9 7900, Ryzen 7 7700, Ryzen 5 7600 (RPL, 65W). - AMD Athlon Gold 7220U, Ryzen 3 7320U, Ryzen 5 7520U (MDN-A0, 15W). - AMD Radeon RX 7900XT/XTX. - NVIDIA RTX 4080 16GB (AD103). - NVIDIA RTX 4070 Ti (AD104). -------------------------------------------------------------------------------------------------- 2.03.1 - November 2022 - Intel Core i9 13900HK, Core i7 13700H/HX, 13650HX, 13620H, Core i5 13500H/HX, 13450HX, 13420H (2.03.1). - Intel Celeron 7305 (2.03.1). - Intel Core i9-13900/K/F/KF, Core i7-13700/K/F/KF, Core i5-13600/K/F/KF, Core i5-13500, Core i5-13400 and Core i3-13100. - Intel ARC A770, A750, A580 (ACM-G10) and A380 (ACM-G11) GPUs. - Support for multipliers > 64x on AMD Ryzen 7000. - Preliminary support for NVIDIA RTX 4000 GPUs. -------------------------------------------------------------------------------------------------- 2.02 - August 2022 - AMD Ryzen 9 7950X, Ryzen 9 7900X, Ryzen 7 7700X, Ryzen 5 7600X. - AMD X670E/B650 chipsets. - AMD Radeon RX 6950 XT (Navi 21 KXTX), RX 6750 XT (Navi 22 KXT), RX 6650 XT (Navi 23 KXT) and RX 6400 (Navi 24 XL). - Preliminary support of AMD EXPO memory overclocking profiles. - Intel Z790 platform. - Intel Xeon Platinum, Gold and Silver "Ice Lake-SP" (10nm, FCLGA4189). -------------------------------------------------------------------------------------------------- 2.01 - April 2022 - Glenfly Arise-GT10C0 GPU. - Intel Core i9-12900T, Core i5-12600T (35W). - Intel Atom x6427FE, x6425RE, x6425E, x6414RE, x6413E, x6212RE, x6211E, x6200FE (Elkhart Lake, FCBGA1493). - Intel Pentium J6425, N6415 (Elkhart Lake, FCBGA1493). - Intel Celeron J6413, N6211 (Elkhart Lake, FCBGA1493). - Preliminary support for Intel ARC 3/5/7 (DG2). - Preliminary support for Intel Raptor Lake (13th gen). - AMD Ryzen 7 5700X, Ryzen 5 5600/5500. - AMD Ryzen 3 ...
kamilziaja054