Fuel - Line Pressure Normalise.pdf

(318 KB) Pobierz

FUEL PRESSURE NORMALIZATION

Page 1 of 1

FUEL PRESSURE NORMALIZATION

1. Connect the fuel pump unit 5P (Black)

connector [1].

Connect the battery negative (–) cable

2. Turn the ignition switch ON.

The fuel pump will run for about 2 seconds

and fuel pressure will rise.

NOTE:

• Do not start the engine.

3. Turn the ignition switch OFF.

4. Repeat previous step 2 or 3 times, and check

that there is no leakage in the fuel supply

system.

Install the fuel tank

https://www.ecom.honda-eu.com/gma10/EMM/Contents/rel/sm/KF016394/html/S2MLF000A070003S2MLF000B070004.html

27/07/2023