Rocker Arm - Removal.pdf

(633 KB) Pobierz

REMOVAL

Page 1 of 2

REMOVAL

Remove the following:

◾

Cylinder head cover

◾

Crankshaft hole cap

◾

Timing hole cap

Turn the crankshaft counterclockwise and align the "T1" mark [1] on the flywheel with the index mark [2] of the alternator

cover.

Make sure that the index lines [3] on the cam sprocket align with the upper surface of the cylinder head and the punch mark

[4] on the sprocket is visible.

https://www.ecom.honda-eu.com/gma10/EMM/Contents/rel/sm/KF016394/html/S2MLF000A100006S2MLF000B100004.html

27/07/2023

REMOVAL

Page 2 of 2

Remove the rocker arm shaft stopper bolt [1], sealing washer [2], and rocker arm shaft bolts [3].

Temporarily install the suitable 6 mm bolt [1] to the rocker arm shaft [2].

Remove the rocker arm shaft by pulling suitable 6 mm bolt.

Remove the suitable 6 mm bolt from the rocker arm shaft.

Remove the rocker arms A [3] and B [4].

https://www.ecom.honda-eu.com/gma10/EMM/Contents/rel/sm/KF016394/html/S2MLF000A100006S2MLF000B100004.html

27/07/2023