Spark Plug.pdf

(455 KB) Pobierz

REMOVAL/INSTALLATION

Page 1 of 2

REMOVAL/INSTALLATION

NOTE:

• Clean around the spark plug base with compressed air before removing the spark plug, and be sure that no debris is allowed to

enter the combustion chamber.

Remove the following:

◾

Ignition coil tray

◾

Radiator

Remove the No.1-2 plug [1] using the equipped

spark plug wrench.

Remove the No.2-2 plug in the same manner.

https://www.ecom.honda-eu.com/gma10/EMM/Contents/rel/sm/KF016394/html/S2MLF000A030007S2MLF000B030004.html

27/07/2023

REMOVAL/INSTALLATION

Page 2 of 2

Remove the No.1-1 plug using the equipped spark

plug wrench [1].

Remove the No.2-1 plug in the same manner.

Inspect or replace the spark plugs as described in

the MAINTENANCE SCHEDULE

Install and hand tighten the spark plug to the

cylinder head, then tighten the spark plug to the

specified torque using the spark plug wrench.

TORQUE:

Spark plug:

22 N·m (2.2 kgf·m, 16 lbf·ft)

NOTE:

• Replace new spark plugs as a set.

Install the following:

◾

Radiator

◾

Ignition coil tray

https://www.ecom.honda-eu.com/gma10/EMM/Contents/rel/sm/KF016394/html/S2MLF000A030007S2MLF000B030004.html

27/07/2023