Jvc-KSF-360-R-Service-Manual.pdf

(2290 KB) Pobierz
KS-F363R/KS-F360R
SERVICE MANUAL
CASSETTE RECEIVER
KS-F363R/KS-F360R
KS-F363R
Area Suffix
E
EX
Continental Europe
Central Europe
KS-F363R
KS-F360R
KS-F360R
Different pont
KS-F363R
KS-F360R
Illumination
Amber
Green
Contents
Safety precaution
Disassembly method
Adjustment method
Description of major ICs
1- 2
1- 3
1-12
1-16~22
COPYRIGHT
2002 VICTOR COMPANY OF JAPAN, LTD.
No.49686
Feb. 2002
KS-F363R/KS-F360R
Safety precaution
!
Burrs formed during molding may be left over on some parts of the chassis. Therefore,
pay attention to such burrs in the case of preforming repair of this system.
1-2
KS-F363R/KS-F360R
Disassembly method
<Main body>
Removing the front panel assembly
(See Fig.1)
1. Press the eject button in the lower right part of the
front panel. Remove the front panel assembly from
the body.
Front panel assembly
Eject button
Fig.1
Tab a
Removing the front chassis assembly
(See Fig.2 and 3)
Prior to performing the following procedure, remove
the front panel assembly.
1. Release the four joint tabs
a
on both sides of the
front chassis assembly and remove the front chassis
assembly toward the front.
Tab a
Front chassis assembly
Fig.2
Heat sink
Tab a
Tab a
Front chassis
assembly
Fig.3
1-3
KS-F363R/KS-F360R
Removing the heat sink (See Fig.4)
1. Remove the three screws
A
on the left side of the
body.
A
Heat sink
A
Fig.4
Joints b
Bottom cover
Removing the bottom cover
(See Fig.5 and 6)
Prior to performing the following procedure, remove
the front panel assembly, the front chassis assembly
and the heat sink.
1. Turn over the body and unjoint the five joints
b
with
the bottom cover and the body using a screwdriver.
Joint b
Joints b
Rear panel
Fig.5
Joints b
Bottom cover
Joint b
Joints b
Rear panel
Fig.6
1-4
KS-F363R/KS-F360R
Removing the main board
(See Fig.7 and 8)
Prior to performing the following procedure, remove
the front panel assembly, the front chassis assembly,
the heat sink and the bottom cover.
1. Remove the screw
B,
the screw
C
and the two
screws
D
attaching the rear bracket on the back of
the body. Remove the rear panel.
2. Remove the two screws
E
attaching the main board
on the bottom of the body. Disconnect connector
CN901,CN902 on the main board in the direction of
the arrow.
B
C
D
Rear panel
D
Fig.7
Main board
E
E
CN902
CN901
Fig.8
Removing the cassette mechanism section
(See Fig.9)
Prior to performing the following procedure, remove
the front panel assembly, the front chassis assembly,
the heat sink, the bottom cover and the main board.
1. Remove the four screws
F
attaching the cassette
mechanism section on the back of the top chassis.
Cassette mechanism section
F
F
Top chassis
F
Fig.9
F
1-5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin