Picking and decoding the GT15 Fiat lock(1).pdf

(631 KB) Pobierz
Picking and decoding the GT15 fiat lock using the
lishi 2in1 pick / decoder
Another new tool in the lishi standard key 2in1 range , another lock that has proved for some
locksmiths a chore to strip and decode , its another quick and simple tool to use with a very
accurate decode.
With 9 positions and just 3 heights to deal with , it is a very simple lock to defeat and decode.
The tool prefers a light to medium tension and no proven sequence picking procedure has been
identified, it is a simple procedure of picking the binding wafer and moving on to the next binding
wafer until the lock is open.
The pick is of the design of 2 seperate wafer lifters , one for the odd numbered wafers and one
for the even number wafers.
The Picking procedure
Insert the pick into the lock , with no tension , check a wafer can be felt in each position, if so we
are ready to begin picking the lock . Apply a light to medium tension via the tension handle and
position the pointer on position 1 line, gently lift the wafer along the line just 1mm, if resisting
pick it, if moving then leave it alone and move to the next position and check this the same, do
this for each position , picking the binding wafer each time until the lock is open.
When picking a binding wafer , only lift it 1mm , if still binding then lift again another 1mm until
moving and returning on the spring in a tight slapping motion, NEVER PICK A WAFER THAT IS
MOVING , LEAVE THESE ALONE !
1st to bind and be picked is the 1 position
2nd to bind and be picked is position 7
3rd is position 9
4th is position 5
5th is position 1 again
6th is position 8
7th to pick is position 6
8th to pick is position 4

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin