Fuel - Line Disconnect.pdf

(385 KB) Pobierz

c0080101 : FUEL LINE INSPECTION > QUICK CONNECT FITTING REMOVAL/INSTALLATION

Page 1 of 1

Screen History

FUEL LINE INSPECTION > QUICK C...



S2MLF000A070003S2MLF000B070003

QUICK CONNECT FITTING REMOVAL/INSTALLATION

NOTE:

• Clean around the quick connect fitting before disconnecting

the fuel feed hose, and be sure that no dirt is allowed to enter

into the fuel system.

• Do not bend or twist the fuel feed hose.

Relieve the fuel pressure

Disconnect the battery negative (–) cable

Push the retainer tab [1] forward.

Press down the retainer and disconnect the connector [2] from the

fuel pump joint/fuel rail.

NOTE:

• To prevent damage and keep foreign matter out, cover the

disconnected connector and pipe end with the plastic bags [3].

Press the connector onto the fuel pump joint/fuel rail until the

retainer locks with a “CLICK”.

NOTE:

• If it is hard to connect, put a small amount of engine oil on the

pipe end.

Make sure the connection is secure; check visually and by pulling

the connector.

Increase the fuel pressure









https://www.ecom.honda-eu.com/emm10/servlet/honda.jp.hm.emm.apps.c008.C0080001Servlet?url=../../gma10/EMM/Contents/rel/sm/...

27/07/2023