instruction_Install_Modecom_Firmware_updates_with_RKBatchTool.pdf

(495 KB) Pobierz
Firmware updates >>> Android 4.1.1 Jelly Bean >>>
Version 1.8
Before updating charge the tablet
Updates erases all data from the device
Please carry out updating proces in accordance
To run an update computer and micro usb connector (included) are required
The first launch of the device after the update may take a little longer than normally
(a few minutes), as it is connected with the installation of the components.
__________________________________________________________
1.
Prepare tablet and micro usb cable which is included in the set
2.
Unzip the file
Firmware_8002_android_4.1.1_version_1.8.zip
on computer disk drive,
a folder named Firmware_8002_android_4.1.1_version_1.8 will be created
3.
Run the file
RKBatchTool.exe
from
RKBatchTool_v1.7
folder
4.
Turn off the tablet and connect it to the computer using usb cable, then
press and hold V-
button,
next press the
Reset
button and keep still about 5 seconds down the
V-,
tablet will be detected by
the system (the drivers will not be added automatically by the system, please follow the description
which is below the photo)
Use the drivers which are located in
RKBatchTool_v1.7\Rockusb_v3.5\Rockusb
folder.
Drivers can be added to the system using the Device Manager System (Control Panel > Device
Manager) or (Computer > Properties > Device Manager)
5.
Location drivers:
RKBatchTool_v1.7\Rockusb_v3.5\Rockusb\x64\win7
(for
Windows 7
64-bit)
RKBatchTool_v1.7\Rockusb_v3.5\Rockusb\x64\win8
(for
Windows 8
64-bit)
RKBatchTool_v1.7\Rockusb_v3.5\Rockusb\x64\vista
(for
Windows Vista
64-bit)
RKBatchTool_v1.7\Rockusb_v3.5\Rockusb\x86\win7
(for
Windows 7
32-bit)
RKBatchTool_v1.7\Rockusb_v3.5\Rockusb\x86\win8
(for
Windows 8
32-bit)
RKBatchTool_v1.7\Rockusb_v3.5\Rockusb\x86\vista
(for
Windows Vista
32-bit)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin